CRMX Nova TX2 RDM

CRMX Nova TX2 RDM is an RDM and DMX for two (2) DMX/RDM universes with support for ethernet based protocols like Streaming ACN (sACN), Pathport, ETCNet, ArtNet, etc. It supports two full DMX universe of up to 1024 channels at maximum refresh rate.
Multiple CRMX TX2 RDM units can be used together to transmit multiple DMX/RDM universes, allowing for expanding the system.

CRMX Nova TX2 RDM is based on LumenRadio's advanced CRMX technology, hence you get all the advanced features such as automated cognitive coexistence, DMX fidelity, low latency, strong encryption, etc.
In the TX2 RDM this is combined with support for RDM (ANSI E1.20). With the accompanying RDM controller software, CRMX SuperNova, you can set up and monitoring your RDM system from your computer. It is possible to use both CRMX Nova RX and CRMX Nova RX RDM receivers with the TX2 RDM, but you will only have RDM outputs from the CRMX Nova RX RDM.
If the user prefere the TX2 RDM can also be used as a RDM proxy allowing the use of any RDM compliant controller. In addition to this, the TX2 supports ethernet based protocols like sACN, ArtNet I & II. The ethernet protocols could be used in any direction. (Ethernet in, wireless and DMX out - or - DMX in, wireless and ethernet out.) All settngs can be done through the easy to use CRMX SuperNova software.

CRMX Nova utilized the international license free ISM band (2.4GHz).

Supported protocols

• USITT DMX512, DMX512(1990) & DMX512-A
• RDM ANSI E1.20 (Controller and Proxy)
• Streaming ACN (Draft and Final)
• ArtNet I & II
• Pathport
• Strand ShowNet
• ETCNet 2 & 3

Power

• High voltage input: 85-264VAC / 47-70Hz / 5W
• Low voltage input: 12VDC ±20% / 5W
• Overvoltage and ESD protected power inputs
• PoE, Power over Ethernet

Physical

• Dimensions (W x H x D): 220 x 44 x 160 mm (8.6" x 1.7" x 4.9")
• Weight: 900g, 30oz
• Enclosure: Anodized extruded aluminum

RF characteristics

• Operational frequency range: 2402-2480 MHz
• Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
• Tested link range: 500m in urban area using 100mW output power mode

Connectors

• DMX: 2 XLR Neutrik® 5-pin gold plated male (self terminated)
• Antenna: 2 RP-TNC male
• Ethernet: 1 Neutrik® Ethercon™ RJ45
• AC: IEC 320-C14 male
• DC: Pluggable terminal strip, Phoenix® MSTD 2,5

Compare this product to other CRMX Nova products.

Downloads

	Product sheet (PDF)
	CRMX SuperNova v1.0.0 for Mac OS X (ZIP)
	CRMX SuperNova v1.0.0 for Windows (MSI)